Configurator 3.0 · OEM dependency engine

CPU → memory → storage → GPU → cooling → network → power, linked live.

The planner now links chassis topology, processor power class, DIMM population, drive media, RAID/HBA path, boot device, GPU slots, cooling mode, OCP/PCIe networking, ambient target and PSU headroom. Rules are sourced from current Dell manuals, HPE QuickSpecs, Lenovo Press guides and Supermicro product documentation.

Platform

2U enterprise rack server32 DIMM max2 CPU max

Dell R760 Installation & Service Manual Dell R760 Product Page

1. Platform, chassis & CPU

Chassis / backplane topology

ProcessorsCPU SKU / TDP class

Intel Xeon Scalable / Xeon Max. Planning TDP: 250W each.

2. Memory population

DIMM capacityDIMM quantity

Installed memory1,024 GB

DDR5 RDIMM only.

3. Storage, RAID & boot

Drive mediaDrive quantity

Controller / RAID path

Chassis limit: 8 positions · SAS / SATA / NVMe

4. GPU & cooling

GPU family

GPU TDP planning: none. Exact OEM GPU PN / riser matrix wins over generic limits.

5. Networking / OCP / AIOM

Networking is handled by the advanced PN/BOM workbench for this legacy profile.

6. Power & environment

PSUQtyAmbient

976Wrough load

1400Waggregate PSU

25°Ctarget ambient

Live dependency stack / derived BOM notes

Storage topology: Dell PERC / supported hardware RAID

Live compatibility

Configuration passes current rules

No blocking high-level rule is triggered. Final PN-level OEM validation is still required before quotation.

Configuration summary

Platform: Dell PowerEdge R760
Chassis: 8 x 2.5-inch SAS/SATA/NVMe
CPU: 2 x Intel Xeon Scalable / Xeon Max · planning 250W
Memory: 16 x 64GB = 1024GB
Storage: 8 x SAS
Controller: Dell PERC / supported hardware RAID
Boot: Profile default
GPU: None
Cooling: Profile default
Network: Default / none
Power: 2 x 700W
Ambient: 25°C

The load estimate is intentionally conservative and is not a substitute for Dell ESSA, HPE Power Advisor, Lenovo DCSC/power tools or Supermicro validated BOM review. Sales engineering confirms exact current PN rules before quotation.

Rule provenance

Profiles with a green verification badge were expanded from OEM documentation checked for this V15 release. Older profiles remain high-level until their full PN matrix is imported.

Dell R760 Installation & Service Manual Dell R760 Product Page

Advanced workbench

PN / BOM / cross-brand engineering workspace

Use this second layer for part-number lookup, network planning, alternative parts and quote preparation after the linked OEM-rule configurator has established the platform dependencies.

Server & network configurators

Build your configuration.

Choose your server, select components and prepare a configuration list. Our team will confirm compatibility, availability and pricing.

Browse all products

8 server platforms7174 model & part numbers160 software & support SKUs

Working with a FusionServer 2288H V7? Check OCP expansion cables for the 8 x 2.5-inch pass-through configuration.

Open xFusion OCP cabling planner

Server model

Configuration overview

0 CPU · 0 DIMM · 0 GB

Processors

Server memory

SSD & hard drives

Power supplies

For upgrades, include all processors and memory that will remain installed, as well as the new parts. Quantities here describe the planned system, not only the items being purchased.

Chassis & installation

Include the parts you will retain as well as new options. The choices below affect cooling, power and available PCIe slots.

Chassis layout

Cooling method

Power input type

AC input voltage (V)Inlet temperature (°C)Network adapter quantity

Storage, network & service requirements

NVMe data drives installed

SAS4 drives installed

Network adapters at 100 Gb/s or above

x16 network adapter installed

Another card occupies PCIe Slot 2

Boot-device hot-plug access required

Memory Fault Tolerance required

Redundant power required

Memory placement

Slots are numbered 1–16 separately for each CPU. The suggested quantities can be adjusted between processors; each processor must use a supported DIMM count.

CPU 1 — not installed

12345678910111213141516

CPU 2 — not installed

12345678910111213141516

Proposed slot-number layout, not a physical motherboard drawing. Check the configuration messages below before installation; mixed-rank channel placement requires a separate check.

Installation requirements

Plan all retained and new components. Select the chassis and installation requirements below before requesting a quotation.
This selection covers listed processors, DIMMs, air-cooling kits, power supplies, risers and NS204i-u boot storage. Ask our team about data-drive backplanes, controllers, network cards, EDSFF, GPUs and liquid cooling.
DIMM operating speed depends on the processor, memory population and firmware. Mixed-rank channel placement, 256 GB DIMMs and other special memory configurations require a separate check.
Power capacity, input feeds, power cords and load during PSU failure must be checked for the complete system. Matching two PSUs does not by itself confirm redundancy.
Confirm the chassis shipping revision, cable routing and firmware before installation. The internal NS204i-u installation is not hot-plug capable; the rear installation occupies PCIe Slot 2.

Service part numbers

These are service identifiers, not interchangeable orderable option kits. Confirm the exact unit, kit contents and replacement revision with our parts team.

P39385-001: HPE 800W Flex Slot Platinum Hot-plug Low Halogen Power Supply
P44412-001: HPE 1000W Flex Slot Titanium Hot-plug Low Halogen Power Supply
P39384-001: HPE 1600W Flex Slot Platinum Hot-plug Low Halogen Power Supply
P51341-001: Boot device cage assembly
P59777-001: M.2 SSD carrier
P69616-001: 480 GB NVMe RI M.2 SV 2280 SSD
P56479-001: Boot device SlimSAS and power cables (miscellaneous cable spare kit; only listed cables used in DL360 Gen11)

Product category

59 parts · contact us to confirm availability

HPE / Server memory / option PN

P43322-B21

16GB RDIMM

Capacity: 16 GBRanks: 1Rated memory speed: 4800 MT/s3DS memory: NoDRAM device width: x8

Compatibility & installation

Confirm the complete installed system, chassis, cooling, power input and installation kits before ordering.

Decision	Record in your brief	Evidence to retain
Requirements	Define workload, capacity, constraints and growth needs.	Complete identifier and source revision
Dependencies	Check component support, physical fit, power and firmware.	Platform document or written clarification
Review output	Export a reviewable requirement or quotation draft.	Offered-unit details and agreed scope

CPU → memory → storage → GPU → cooling → network → power, linked live.

1. Platform, chassis & CPU

2. Memory population

3. Storage, RAID & boot

4. GPU & cooling

5. Networking / OCP / AIOM

6. Power & environment

Live dependency stack / derived BOM notes

PN / BOM / cross-brand engineering workspace

Build your configuration.

Configuration overview

Chassis & installation

Memory placement

Build the full picture of your installation.

Choose the exact platform

Select parts and requirements

Review and share the list

Plan beyond CPU, memory and capacity.

Connect the hardware and software requirements.

Ports & topology

Optics & cabling

Licenses & support

Know what the list does—and what needs confirmation.

Ready to review the complete configuration?

Configuration & comparison

System planning

Parts comparison

Network planning

Requirements

Dependencies

Review output

Set project constraints

Build candidate configuration

Review dependencies

Prepare RFQ

Recorded catalog identities

Your preparation progress

System configurator

Compare records

Network planner

Keep the requirement specific.