ASTER RACKIT — ITEM RFQ DRAFT Not an offer, order, stock allocation or OEM-approved BOM. Identifier: RS720-E10-RS12E Manufacturer: ASUS Record type: model URL: https://www.aster-rackit.com/explore/product/asus-rs720-e10-rs12e-4984a515dc Quantity: [enter] Condition: [confirm] Destination: [enter] RECORDED TECHNICAL FIELDS — CHECK EVIDENCE STATUS Processor / System Bus: 2 x Socket P+ (LGA 4189) 3rd Gen Intel® Xeon® Scalable Processors Family(270w) Confirm the supported components for the required configuration. UPI (11.2 GT/s) [unverified_inherited] Core Logic: Intel® C621A Chipset [unverified_inherited] Memory: Total Slots :32 (8-channel per CPU, 16 DIMM per CPU)Capacity :Maximum up to 4TB per CPU Memory Type :DDR4 3200/2933 RDIMMDDR4 3200/2933 LRDIMMDDR4 3200/2933 LR-DIMM 3DS3200/2933 RDIMM 3DSMemory Size :64GB, 32GB, 16GB, 8GB RDIMM256GB, 128GB, 64GB RDIMM 3DS128GB RDIMM 3DS/LR-DIMM 3DS Confirm the supported components for the required configuration.* Actual memory frequency differs from Intel CPU types and memory module. Please check Intel official site for more detail about the memory types supported by each CPU. [unverified_inherited] Expansion Slots: Up to 9 x Expansion slots 2 x PCIe Gen4 x8 or 1 x PCIe Gen4 x16, FHFL (CPU1 x1) 1 x PCIe Gen4 x8, FHFL (CPU1 x1) 1 x PCIe Gen4 x16, FHFL or OCP 3.0 NIC socket (CPU1 x1) 4 x PCIe Gen4 x8 or 2 x PCIe Gen4 x16, FHFL (CPU2 x2) 1 x PCIe Gen4 x8 or x16, LP (if PCIe M.2 in use, it will operate at x8 link) (CPU2 x1) *Installing GPU cards will occupied expansion slots. [unverified_inherited] Storage: Storage Controller : Intel C621A Intel® Rapid Storage Technology Enterprise(RSTe) (For Linux/Windows) (Support Software RAID 0, 1, 5, 10 ) Intel®VROC (For Linux/Windows) (Support Software RAID 0/1/5/10 ) SAS Controller : ASUS PIKE II 3008-8i 8-port SAS 12G RAID card(Optional) ASUS PIKE II 3108-8i 8-port SAS 12G HW RAID card(Optional) Broadcom MegaRAID 9560-16i (Optional) [unverified_inherited] Drive Bays: Front bays: 12 x 3.5 or 2.5" hot-swap bays (8x NVMe/SATA/SAS*+ 4x SATA/SAS*) Rear bays (option): 2 x 2.5" hot-sway drive bays (2x SATA/NVMe) 2 x M.2 connector (NGFF 2280/2260. PCIe Gen4x4 link) *SAS support only from SAS HBA/RAID card **must with PIKE II 3008-8i, 3108-8i/16PD(slot4) to support up to 12x SATA/SAS ***Support tri-mode card [unverified_inherited] System Fan: 4(if support GPU SKU, it will have external fan) [unverified_inherited] Networking: 2 x USB 3.2 Gen 1 ports Option 1 1 x Quad Port Intel I350-AM4 1G LAN Controller + 1 x Mgmt LAN or Option 2 1 x Dual Port Intel X710-AT2 Gigabit 10G LAN Controller + 1 x Mgmt LAN or None x + 1 x Mgmt LAN [unverified_inherited] Front I/O Ports: 2 x USB 3.2 Gen 1 ports [unverified_inherited] Rear I/O Ports: 2 x USB 3.2 Gen1 ports 1 x VGA port 1 x RJ-45 Mgmt LAN port 4/2 x NIC ports* * The number of NIC ports available depends on the LAN Controller card installed. [unverified_inherited] Switch/LED: Front Switch/LED: 1 x Power switch/LED 1 x Location switch/LED 1 x Reset switch 1 x HDD Access LED 1 x Message LED LAN 1-4 LED * LAN3-4 for Mezzazine card use Rear Switch/LED: 1 x Power switch 1 x Q-Code/Port 80 LED 1x Location LED [unverified_inherited] Management Solution: ASUS Control Center(Classic) On-Board ASMB10-iKVM for KVM-over-IP [unverified_inherited] Dimensions: 840mm x 449mm x 88mm(2U) 33.07" x 17.68" x 3.46" [unverified_inherited] Form Factor: 2U [unverified_inherited] Weight: Net Weight :18.195KG [unverified_inherited] Power Supply: 1+1 Redundant 2400W 80 PLUS Titanium Power Supply Rating: 100-127Vac/ 200-240Vac, 13.8A/15A (for each inlet), 50/60Hz, Class I 1+1 Redundant 1600W 80 PLUS Platinum Power Supply Rating: 100-127Vac/200-240Vac, 13A/9.5A (for each inlet), 50-60Hz, Class I 1+1 Redundant 1200W 80 PLUS Platinum Power Supply Rating: 100-127Vac/200-240Vac, 10A/8A (for each inlet), 50-60Hz, Class I [unverified_inherited] Environment: Operation temperature: 10℃ ~ 35℃ Non operation temperature: -40℃ ~ 60℃ Non operation humidity: 20% ~ 90% ( Non condensing) [unverified_inherited] Note: *If only 1 CPU is installed, some functions might be not available. *SAS support only from SAS HBA/RAID Card *If PCIe expansion slot 3 choosing OCP3.0 option, slot 4 will be limited to support PIKE card only. [unverified_inherited] CPU Heatsink/ Cooler: 2 [unverified_inherited] Fan: 1 (For supporting GPU SKU, it will have external fan) [unverified_inherited] PURCHASE CHECKS 1. Name the chassis layout and front, middle and rear drive positions before selecting processors or storage. 2. Identify the installed backplane, risers, cables and controller. A list of maximum specifications is not one simultaneously available configuration. 3. Keep CPU quantity, memory population, accelerator power and cooling on the same bill of materials. Review the dependencies whenever one of them changes. 4. List rails, bezel, power leads, boot media, management functions and operating-system licenses separately. Do not assume they are included with a bare chassis. 5. For pre-owned equipment, request an actual-unit inventory and diagnostic record. Agree acceptance criteria before the unit is dispatched. PHOTO / EVIDENCE REQUIREMENTS Front and rear chassis Actual service label, private data redacted Internal topology when relevant All included accessories Actual diagnostic report Confirm current exact identity, compatibility, stock, price, warranty and delivery terms with sales@aster-rackit.com.